UT6573 | Bobcat

The UT6573's 73.1 horsepower turbocharged, common rail Tier 4 diesel offers robust, high-power performance plus an efficient fuel system. You get reliable tractor start-ups and long component life, as well as low noise and vibration for comfortable work. With a turbocharged engine you get consistently high performance and impressive low-end torque that won't let up, and 62.1 horsepower reaches the rear PTO.

The 12x12 powershuttle transmission gives you three ranges, each with four powerful and efficient gears in both forward and reverse. The electronic hand clutch shifts smoothly from gear to gear for high torque or faster travel speeds on command, and switching from forward to reverse needs no clutching. Clutch pedal engagement control lets you tune how early the clutch engages. Higher travel speeds up to 19.9 mph mean less time moving between jobs, and four-wheel drive engages with the push of a button whenever the work demands it.

The Category 2 three-point hitch lifts 3,898 lbs at 24 inches behind the lift point and is the key to the UT6573's versatility with both non-powered and PTO-powered implements. Hydraulic draft control senses extra strain on the hitch in hard ground, raises the implement just enough to get through, then returns it to the desired depth. The standard rear PTO runs in two modes: 540 rpm at 2,500 engine rpm for maximum power, or 540E at 1,800 engine rpm to use less fuel as you work. Engage it with the push and turn of a button, hold your rpm with PTO cruise, and let auto PTO disengage it when the hitch is raised.

Surround yourself in comfort features that shield you from the elements and make easy work of even the toughest jobs. The UT6573's full, radio-ready cab delivers the ultimate in utility tractor comfort, and its heating and air conditioning system provides year-round comfort no matter the weather. All the controls, gauges and buttons are laid out with ease of use in mind, and the illuminated dashboard lets you monitor performance even when natural light is low.

Sit in the UT6573's cab and you will quickly appreciate the panoramic visibility made possible by wide glass panels and minimal obstruction. A window to the three-point hitch lets you monitor implement operation and work performance without frequently stepping out of the cab. When cold or wet weather hits, the standard defrost system clears your view quickly.

A fully adjustable seat accommodates every operator and includes a foldable right-hand armrest for extra comfort and support. Power steering delivers easy maneuverability, the tilt function lets any operator find the most comfortable wheel position, and a rubber deck mat dampens vibration through the floor. Bright LED headlights, front and rear LED work lights and an LED tail lamp keep you working and visible in low light.

There are no side panels to remove when you need to reach the engine. Fold down the brush guard, then lift the hood. With the lift assist of gas springs it takes little effort, and when fully opened the hood stands nearly perpendicular to the engine compartment for optimal maintenance access and easy-to-reach major service points.

Greasing locations make routine maintenance easier to complete, which helps ensure years of reliable performance. Engine oil drain, fill and checks are easy to reach and the filter can be quickly replaced. Hydraulic oil fill, fuel fill, fuel filter, battery and axle fills are all within easy reach as well.

If the fuel filter is plugged or reaching the end of its service life, or if there is an issue with the low-pressure fuel system, a display indicator lets the operator know. You and your staff can stay aware of service needs and protect equipment uptime.

The UT6573 packs a lot of versatility for the price, and hard-working Bobcat implements and attachments are made to handle the many possibilities you uncover on your land. Bobcat gives you access to a world of implements and front-end loader attachments, so you can get the most work from your tractor investment.

The FL10 mechanical self-leveling front-end loader is a must-have for digging, dirt moving, loading and carrying material. It automatically keeps your load level through the full range of motion, keeping pallet forks level and minimizing bucket spillage as the loader raises and lowers. With the Bob-Tach mounting system it is easy to attach and remove, with quick disconnect and free-standing capability when removed. A heavy-duty brush guard comes with the loader to protect the front end from debris and branches, and rear wheel weights are available to optimize loader performance.

Rear remote hydraulics give you even more versatility by enabling hydraulic functions on many implements. The UT6573 comes standard with one pair of rear remote hydraulics, with a second and third valve optional for implements that need more circuits.