UT6066 | Bobcat

The UT6066's 66.4 horsepower turbocharged, common rail Tier 4 diesel offers robust, high-power performance plus an efficient fuel system. You get reliable tractor start-ups and long component life, as well as low noise and vibration for comfortable work. With a turbocharged engine you get consistently high performance and impressive low-end torque that won't let up, and 57.4 horsepower reaches the rear PTO.

The 12x12 powershuttle transmission gives you three ranges, each with four powerful and efficient gears in both forward and reverse. The electronic hand clutch shifts smoothly from gear to gear for high torque or faster travel speeds on command, and switching from forward to reverse needs no clutching. Clutch pedal engagement control lets you tune how early the clutch engages. Higher travel speeds up to 19.8 mph mean less time moving between jobs, and four-wheel drive engages with the push of a button whenever the work demands it.

The Category 2 three-point hitch lifts 3,594 lbs at 24 inches behind the lift point and is the key to the UT6066's versatility with both non-powered and PTO-powered implements. Hydraulic draft control senses extra strain on the hitch in hard ground, raises the implement just enough to get through, then returns it to the desired depth. The standard rear PTO runs in two modes: 540 rpm at 2,500 engine rpm for maximum power, or 540E at 1,800 engine rpm to use less fuel as you work. Engage it with the push and turn of a button, hold your rpm with PTO cruise, and let auto PTO disengage it when the hitch is raised.

The UT6066's open operator station supports hours of comfortable, confident work. All the controls, gauges and buttons are laid out with ease of use in mind, and the illuminated dashboard lets you operate and monitor performance even when natural light is low. The station provides simplicity and ease of use for operators who get on and off the tractor frequently throughout the day, and the single-lever loader joystick sits within easy reach so you can focus on loader work.

Power steering delivers easy maneuverability, and the tilt function lets any operator adjust the wheel to the position that feels most comfortable. Underfoot, a rubber deck mat dampens vibration through the floor for a more comfortable day's work.

Bright LED headlights illuminate the job for evening work and other low-light conditions. Additional LED work lights on the front and rear provide extra illumination and visibility to the work at hand, and an LED tail lamp keeps you visible from behind.

There are no side panels to remove when you need to reach the engine. Fold down the brush guard, then lift the hood. With the lift assist of gas springs it takes little effort, and when fully opened the hood stands nearly perpendicular to the engine compartment for optimal maintenance access and easy-to-reach major service points.

Greasing locations make routine maintenance easier to complete, which helps ensure years of reliable performance. Engine oil drain, fill and checks are easy to reach and the filter can be quickly replaced. Hydraulic oil fill, fuel fill, fuel filter, battery and axle fills are all within easy reach as well.

If the fuel filter is plugged or reaching the end of its service life, or if there is an issue with the low-pressure fuel system, a display indicator lets the operator know. You and your staff can stay aware of service needs and protect equipment uptime.

The UT6066 packs a lot of versatility for the price, and hard-working Bobcat implements and attachments are made to handle the many possibilities you uncover on your land. Bobcat gives you access to a world of implements and front-end loader attachments, so you can get the most work from your tractor investment.

The FL10 mechanical self-leveling front-end loader is a must-have for digging, dirt moving, loading and carrying material. It automatically keeps your load level through the full range of motion, keeping pallet forks level and minimizing bucket spillage as the loader raises and lowers. With the Bob-Tach mounting system it is easy to attach and remove, with quick disconnect and free-standing capability when removed. A heavy-duty brush guard comes with the loader to protect the front end from debris and branches.

Rear remote hydraulics give you even more versatility by enabling hydraulic functions on many implements. The UT6066 comes standard with one pair of rear remote hydraulics, and additional valves are optional for implements that need more circuits.