Why Fecon Skid Steer & Track Loader Mulchers
Carbide Tooling
Long-life carbide tools chew through hardwoods, knots, and stumps without backing off the throttle.
Variable-Speed Rotor
Variable-displacement motor maintains rotor tip speed under load for higher production and cleaner cuts.
Built for Production
Reinforced housing, AR steel skid plates, and replaceable wear parts engineered for daily commercial use.
Standard & High Flow
Models matched to 17-30 GPM standard-flow hosts up through 30-45 GPM high-flow CTLs and skid steers.
RK5015
17-30 GPM
- Cutting Capacity: 50"
- Aux. Standard Flow: 17 - 30 GPM
- Weight: 1340 lb
RK6015
17-30 GPM
Standard Flow
- Cutting Capacity: 60"
- Aux. Standard Flow: 17 - 30 GPM
- Weight: 1465 lb
BH62SS
30-45 GPM
- Cutting Capacity: 50"
- Aux. High Flow: 30 - 45 GPM
- Weight: 2450 lb
BH74SS
30-45 GPM
- Cutting Capacity: 61"
- Aux. High Flow: 30 - 45 GPM
- Weight: 2790 lb
BH85SS
30-45 GPM
- Cutting Capacity: 87"
- Aux. High Flow: 30 - 45 GPM
- Weight: 3140 lb
Mulcher Specs:
| MODEL | RK5015 | RK6015 | BH62SS | BH74SS | BH85SS | BK6218 | BK7618 |
|---|---|---|---|---|---|---|---|
| Working Width | 50" | 60" | 50" | 61" | 72" | 62" | 76" |
| Overall Width | 61" | 71" | 65" | 61" | 72" | 76" | 91" |
| Weight (lbs.) | 1,340 lbs | 1,465 lbs | 2,450 lbs | 2,790 lbs | 3,140 lbs | 2,600 lbs | 2,980 lbs |
| Flow Type | Low Flow | High Flow | High Flow | High Flow | High Flow | High Flow | |
| Flow Range (GPM) | 17 - 30 GPM | 17 - 30 GPM | 30 - 45 GPM | 30 - 45 GPM | 30 - 45 GPM | 30 - 45 GPM | 30 - 45 GPM |
| Number of Tools | 22 | 26 | 24 | 30 | 36 | 24 | 30 |
| Rotor Diameter | 15" | 15" | 20" | 20" | 20" | 18" | 18" |
Frequently Asked Questions
Standard flow vs. high flow — which mulcher do I need?
Standard-flow Bull Hogs (RK5015, RK6015) run on hosts producing roughly 17-30 GPM at standard pressure
and are the right choice for most factory-spec skid steers. High-flow models (BH62SS, BH74SS, BH85SS,
BK6218, BK7618) require 30-45 GPM high-flow hydraulics — typically a high-flow track loader or a skid
steer ordered with the high-flow option. If you're not sure what your machine puts out, check the spec
plate or call us with your model number.
What size skid steer or track loader do I need to run a Fecon mulcher?
Match the cutter to the carrier's auxiliary hydraulic flow first, then weight and horsepower. A
50-inch RK5015 fits most 70-90 HP standard-flow skid steers, while a 72-inch BH85SS needs a high-flow
CTL in the 90+ HP class with adequate counterweight. We'll spec the right combo for your machine and
the material you're cutting.
Carbide tools vs. fixed knives — which rotor configuration is right?
Carbide tools last significantly longer and are the preferred choice for mixed material, dirty
conditions, and stumps. Fixed knives leave a finer finish and cut faster in clean, soft wood, but they
wear quickly when they hit dirt or rocks. Most production land-clearing customers run carbide; finish
mulching crews often choose knives.
Can I rent a Fecon mulcher before buying?
Yes. Carleton Equipment rents Fecon mulcher attachments out of multiple branches. Use the Rental Request
button at
the top of this page or visit our Fecon rental equipment page for current availability and rates.
Does CECO service Fecon attachments?
Yes — Carleton Equipment is a factory-authorized Fecon dealer with trained service technicians and
stocked OEM
parts. Whether you bought from us or not, we handle warranty work, rotor rebuilds, tooth replacement,
and field service on Fecon SSL/CTL mulchers.