V50 Skeleton Tooth Grapple | Virnig
V50 Skeleton Tooth Grapple Attachment by Virnig
Two-cylinder independent grapple with and open sided design for hauling brush and logs. Open bottom allows dirt to fall through.
- Series 23 cast, pin-on teeth help cut into soil, dig out rocks and roots and extend edge life.
- Every tine is constructed from one piece of 1/2″ Grade 80 steel, from tip to top brace, to add rigidity.
- NitroSteel® cylinder rods and Teflon® coated bushings on all pivots.
- Standard with Cylinder Guards.
|Overall Width (Inches)||73.5||79.5||85.5||91.5|
|Height: Overall / Bucket (Inches)||27.5 / 21.3|
|Overall Depth (Inches)||43.3|
|Number of Teeth||8||9||9||10|
|Space Between Teeth (Inches)||6.8-8.8||6.3-8.8||6.8-9.3||6.8-8.8|
|Space Between Tines (Inches)||5.5|
|Tine Thickness (Inches)||0.5*|
|Cylinder Bore | Stroke (Inches)||2.0 | 8.375|
|Cylinder Pins | Hinge Pins Diameter (Inches)||1.25 | 1.563|
|Grapple Jaw Opening (Inches)||40.9|
|Approximate Weight (Pounds)||1005||1055||1095||1145|
|Recommended Loader Capacity||Greater than 1500 pounds|
*Tine Material is Grade 80 Plate (80,000 Minimum Yield Strength).