T3 Driver Post Driver by Danuser
The T3 Post Driver is a small driver that delivers big time results! The T3 Driver will drive T-posts up to a 3" O.D. (outside diameter) pipe at a rate of up to six strikes per second. The top of the post is fully contained to prevent kick out and protected from damage by the strike plate. Use your tractor, skid-steer, mini-ex, loader, or backhoe to carry the weight of the driver. We offer several mounting options, including an offset skid-steer quick attach which allows the operator to drive parallel to the fence line, a bolt-on/weld-on bracket that mounts to almost any flat surface, and a tilt bracket for up to 20° adjustments left or right. Use down pressure from the host vehicle to drive more posts in the ground faster. The T3 Driver includes one bolt-on/weld-on bracket, hoses and flat face ISO couplers for simple plug and play operation. This is an ideal post driver for most farmers, ranchers, fencing contractors, and rental yards.
|Post Dimensions:||T-post to 3" O.D. pipe|
|Impact Force:||2,000 lbs. per stroke|
|Impact Energy:||40 ft.-lbs. per stroke|
|Hammer Weight:||10 lbs.|
|Strokes Per Second:||6|
|T3 Driver||Skid‑Steer||Skid‑Steer Offset||Euro/Global||John Deere 200-500 Series|
|Overall Width||11"||45.5"||Extendable 50.5"-86.5"||45"||49"|
|Weight||86 lbs.||173 lbs.||286 lbs.||181 lbs.||193 lbs.|
|Hydraulic Requirements||1500-3000 PSI & Up to 30 GPM*|
15-30 GPM. It will function at fewer strikes per second below 15 GPM.