OSC220US | Okada
OSC220US Pulverizer by Okada
The new OSC220US uses a robust, pass-through grizzly design, allowing crushed material to easiliy release from the crushing zone between jaws. Also this OSC220US has repleable tooth pad.
Secondary breaking crushers were developed as a result of a growing need to reduce disposal volume and recycle concrete waste created during concrete building demolition. The flat, wide jaw design and an internal speed valve make it possible to grab and crush large sections of concrete quickly.
Replaceable Tooth pad
Save your time and will not stop the job site. No welding is required.
Grizzly Design (OSC220US only)
The pulverizer construction uses a robust, pass-through grizzly design, allowing crushed material to easily release from the crushing zone
between the jaws.
Unrivaled Crushing Force, Short Cycle Time
Okada's geometric design converts cylinder output to crushing force in constant manner and creates unmatched crushing force with a short cycle time.
The large jaw opening and larger crushing area ensure unparalleled productivity.
Pressure Relief Valve
A standard built-in pressure relief valve protects against overload.
The use of a cylinder rod protector and the location of the hydraulic cylinder in the frame protects the cylinder rod from exposure to concrete rubble.
Unique Okada Crushing Teeth
The unique Okada crushing teeth combine pulverizing wedges and cutter blades to efficiently process reinforced concrete. The crushing tooth and wedges are made of wear-resistant cast alloy, and the bolt-on cutter blade is four edge indexable.
Reduces the cycle time.
|Operating Weight (Lbs)||4277|
|Oil Flow (GPM)||44-116|
|Operating Pressure (PSI)||4600|
|Overall Length (Inches)||75|
|Overall Height (Inches)||53.7|
|Max Jaw Opening (Inches)||34.8|
|Cutter Blade Length (Inches)||5.9|
|Crushing Force at Center of Jaw (US Tons)||99|
|Carrier Weight Range (1000 Lbs)||40-77|