Planer | Bobcat

Size: 14"
General Info

Bobcat® Planer


Cut and mill concrete and asphalt with the controlled removal process of the planer attachment. 

The milling process involves low angle, high velocity blows in a controlled pattern that uniformly chips pavement. Depth, width, and slope control are easily set and maintained by the operator. Milled material can be immediately recycled, nicely finishing any asphalt and repair jobs. The Bobcat® planer attachment is much less expensive to maintain and more maneuverable than dedicated planers. 

The planer attachment is versatile and durable, delivering high torque for maximum cutting and milling performance. Choose from four different planer models listed below.

Standard flow planer provides excellent performance on standard flow machines allowing a lower initial investment for those that only need to use a planer periodically. High flow planers utilize the increased hydraulic horsepower available for high production needs.

Top Tasks

  • Mate uneven pavement surfaces
  • Clean up around larger miller machines
  • Cut drainage in a parking lot
  • Mill around manholes
  • Taper edges on a roadway

How It Works

Carbide-tipped bits are mounted on a revolving drum to cut and pulverize pavement material. After material has been milled, it leaves the planer housing through a rear opening. 

Planer skis are used to adjust the angle and depth by moving the right and left ski up or down. Depth gauges are visible from the cab to provide a measurement reference of each ski depth. Bobcat planers have better visibility of the skis, so operators can easily control the path of the planer and the machine. Even on rough terrain, the planer skis maintain surface contact, resulting in a consistent cut depth.


Drum Options: Multiple drum options to match your job needs.

14-24-Inch Models

  • Oscillation: Housing oscillates up to  +/- 15 degrees allowing the operator the ability to cut necessary angles or match two uneven surfaces.
  • Replaceable Ski Wear Pads: Make maintenance easier and more affordable.
  • Steel Wheels: Mounted on the rear, wheels provide support and reduce tire bounce for a smoother cut.
  • Side Cutting Teeth: Decreases drum binding in the cut for smoother operation and provides a vertical edge for improving the joint bond between new and existing road layers.
  • Free Floating Oscillation: The cutting wheel oscillates side to side to provide optimum surface tracking regardless of loader movements, so even if the loader tires fall into a hole or depression it will cut evenly. With the Bobcat planer, pavement milling is a controlled process as the depth, width, and slope are easily set and controlled by the operator.
  • Hydraulic Side Shift: Side shifting allows milling outside the width of the carrier, making possible flush cutting adjacent to curbs and walls.
  • Large Rear Opening: Reduces the amount of material being re-milled, increasing productivity because more material can be removed from the planer before it is reground into smaller pieces.
  • Removable End Plate: As the only manufacturer of this feature, Bobcat allows the planer to mill flush against wall with no further clean-up work required.
  • Visible Left Ski: Keeps the planer centered and provides easier control over its path.
  • Top Access Panel: To inspect and replace cutting bits, a top access panel allows for easy inspection and saves maintenance time. Planer bits can be changed and removed using the specially designed bit tool.
  • Planer Drum: One-piece concentric unit made for better durability and smooth cutting.

18- and 24-Inch Models

  • Priority Valve: Diverts oil to depth function without causing momentary loss of power to planer drum, allowing the operator to make adjustments on-the-go without sacrificing cutting power.
  • Independently Adjustable Skis: Fingertip controls from the operator’s seat provide depth and angle control for a consistent-depth cut. Also, skis push debris away, keeping the skids in contact with the cutting surface.

40-Inch High Flow Model

  • Diverter Valve: Allows the operator to switch between hydraulic side-shift and hydraulic oscillation functions.
  • Front Access Panel: To inspect and replace cutting bits, a front access panel allows for easy inspection and saves maintenance time.
  • Hydraulic Side Shift: Side shifting allows milling outside the width of the carrier, making possible flush cutting adjacent to curbs and walls.
  • Two Direct-Drive Motors: With one on each side of the drum, the two motors increase torque force which provides an increase in productivity and life of the planer.


Planer Sizes Standard Flow - 14" High Flow - 18" High Flow - 24" High Flow - 40"



Operating Weight 1107 lb 1191 lb 1254 lb 2300 lb
Length 47.5 in 47.5 in 47.5 in 44 in
Width 66.4 in 66.4 in 66.4 in 68 in
Height 29.3 in 35.2 in 35.2 in 32 in
Cutting Depth Max 6 in 6 in 6 in 5 in
Cutting Depth Min 0 in 0 in 0 in 0 in
Drum Width Max 14 in 18 in 24 in 40 in
Number of Bits N/A N/A N/A 78
Sideshift 29.8 in 29.8 in 29.8 in 25.6 in
Maximum Cutting Angle 15° 15° 15°
Planing Distance Next to Curb 75.4 in 75.4 in 80.4 in 2.6 in
Drum Diameter 17.8 in 17.8 in 17.8 in 14.5 in
Flow Range Min 15 gal/min 22 gal/min 22 gal/min 25 gal/min
Flow Range Max 27 gal/min 40 gal/min 40 gal/min 59 gal/min


Compatible Carriers

Skid-Steer Loaders
Bobcat A770

Bobcat S450

Bobcat S550

Bobcat S570



Bobcat S590



Bobcat S595



Bobcat S630



Bobcat S650



Bobcat S740



Bobcat S770


Bobcat S850


Compact Track Loaders
 Bobcat T450




Bobcat T550



Bobcat T590



Bobcat T595



Bobcat T630



Bobcat T650



Bobcat T740

Bobcat T770

Bobcat T870

Recently viewed


Have questions? We have answers!