Fitted for tractors, the Stumper 3500 has a 36" diameter cutting wheel that features 25 teeth on a 1" thick wheel, which can help you achieve a 12" cut per pass on a direct drive system. Like the other Stumper products, this has no belts, pulleys, or gearboxes, has no electrical connection, or case drain required. The Stumper 3500 only requires 2 grease fittings, 2 auxiliary sets of remotes, a 60 degree swing angle, on a 45 - 90 horsepower mid- to large-frame tractor with a 540 RPM PTO speed, on a category 11 3-point hitch. Grind more, safely and efficiently with a Stumper 3500!
Specs
36" Cutting Diameter
12" Cut Depth per pass
24" below depth per pass
1,200 lb. Weight
60" Swing Angle
45-90 HP recommended
540 RPM PTO Speed
Features
Features
Benefits
Motor
Low RPM / High Torque / High Performance
Plug-N-Play
No Electrical connections required / Works on any machine
Oversize Rakers
Limit the depth of cut / Prolong tooth life
Face & Edge Grinding
Large passes with the wheel face / Plunge cuts
Below-Grade Grinding
All Stumpers easily grind as deep as necessary below grade
Maximum Maneuverability
Stumpers go anywhere the carrier goes quickly and easily allowing you to grind right next to objects safely with good visibility
Quality Fabrication
We use high quality / premium materials & components
You may also like
Recently viewed
Michigan's Equipment Supplier
Serving Michigan Since 1938.
Service & Maintenance
Peace of mind long after your puchase.
Rental
Need a machine or attachment yesterday? We also Rent!
Questions?
Contact us. Call, Email, Message, or reach out on social media.